Author Topic: More millwright work with some specialty tooling.  (Read 2740 times)

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #30 on: April 18, 2017, 10:02:50 AM »
All done

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #31 on: April 19, 2017, 07:39:26 AM »
Horsepoop safety wire job. Had to crisco myself in.

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #32 on: April 19, 2017, 09:44:58 AM »
More

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #33 on: April 19, 2017, 02:24:17 PM »
Getting ready to put the gears in. Total gearbox weight 140000lbs

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #34 on: April 19, 2017, 03:54:28 PM »
To show the size

Sent from my SM-G920P using Tapatalk


Offline Muddy

  • Knows nut from bolt
  • ***********
  • Join Date: Apr 2011
  • Posts: 10078
  • location: Rock, Pa
  • Wrenching To Keep The American Farmer Growing
Re: More millwright work with some specialty tooling.
« Reply #35 on: April 19, 2017, 07:53:36 PM »
sharepopcorn sharepopcorn sharepopcorn sharepopcorn

Sent from my XT1635-01 using Tapatalk

"And on the 8th day, God looked down on his planned paradise and said, "I need a caretaker." So God made a farmer."






Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #36 on: April 20, 2017, 12:11:55 PM »
4" socket. And a super nut. Each jack bolt is 310ftlbs

Sent from my SM-G920P using Tapatalk


Offline DeadNutz

  • Hero Member
  • *****
  • Join Date: May 2015
  • Posts: 1472
  • location: Minden, NV
Re: More millwright work with some specialty tooling.
« Reply #37 on: April 20, 2017, 12:59:35 PM »
Very impressive and interesting. Keep it coming George. thumbsup2

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #38 on: April 20, 2017, 03:34:59 PM »
Done

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #39 on: April 20, 2017, 04:00:03 PM »
Inside of giant roller bearing.

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #40 on: April 21, 2017, 07:38:13 AM »
Screw press.

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #41 on: April 26, 2017, 05:50:58 PM »
Press rail change

Sent from my SM-G920P using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #42 on: May 09, 2017, 09:33:44 AM »
30 mm 12ft boring bit. Not for shop drill press

Sent from my SM-G920P using Tapatalk


Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 12050
  • location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: More millwright work with some specialty tooling.
« Reply #43 on: May 09, 2017, 09:46:59 AM »
Luv this stuff!  beerdude
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2235
Re: More millwright work with some specialty tooling.
« Reply #44 on: May 09, 2017, 01:16:42 PM »
20 foot rotary grinder.

Sent from my SM-G920P using Tapatalk


The Garage Gazette

Re: More millwright work with some specialty tooling.
« Reply #44 on: May 09, 2017, 01:16:42 PM »

Tags: