Author Topic: Tool Resource Guide  (Read 5872 times)

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 12893
  • location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Tool Resource Guide
« on: June 17, 2010, 10:50:51 PM »
DISCLAIMER: THE FOLLOWING LIST HAS BEEN ASSEMBLED AS A RESOURCE FOR THE MEMBERS, AND THOSE THAT VISIT THE GARAGE GAZETTE. THE SITE OWNER, AND ALL MODERATORS WORKING ON HIS BEHALF ARE NOT RESPONSIBLE FOR ANY BUSINESS DEALINGS WITH ANY OF THE RESOURCES LISTED BELOW. WE BELIEVE THE FOLLOWING RESOURCES TO BE HONEST, REPUTIBLE, AND RELIABLE, HOWEVER, THERE IS NO OBLIGATION EXPRESSED OR IMPLIED BY THE SITE OWNER, OR HIS AGENT(S) IN CONNECTION TO ANY BUSINESS TRANSACTIONS, OR BUSINESS CONDUCTED WITH THE FOLLOWING VENDORS.





Quote from: rusty on April 04, 2009, 06:34:31 PM
http://www.pbswisstools.com/?L=4           PB Swiss

http://www.graytools.com/Default2.htm   Gray tools

http://buy1.snapon.com/catalog/catalog.asp  Snap  on

http://www.stanleyproto.com/default.asp?TYPE=STATIC&PAGE=HOME.HTM  Proto tools

http://www.asttool.com/front_page.php  AST Specialty tools

http://www.lislecorp.com/tool_index.cfm  Lisle

Quote from: goodfellow on November 12, 2009, 09:52:45 AM
I "borrowed" this from GJ member "draftpick" -- he did an excellent job in cataloging rebuild kits for vintage Danaher (Craftsman/EASCO/NAPA/Allen/KD) ratchets. I'm sure he won't mind sharing. Great job on his part, and it is definitley very useful
 
GREAT IDEA GOODFELLOW! I WILL ADD IT TO THE RESOURCE LIST, THANK YOU SO MUCH!  UB 11/10/2009

Allen 1/4 model# 10904, repair kit#10908
Craftsman 1/4 model# 43187,43178, repair kit#43426
Easco 1/4 model#711106, repair kit#10908
K-D 1/4 model#711106, repair kit#10908
Master Mechanic???
Napa 1/4 model# NHT NM-47, repair kit#10908

Allen 3/8 model#11904, repair kit#11908
Craftsman 3/8 model#43781,42794,42792,43788, repair kit#43436
Easco 3/8 model#721107,721413, repair kit#11908
K-D 3/8 model#721109,721413,721412, repair kit#721103,11908
Master Mechanic???
Napa 3/8 model# NHT NB-47, repair kit# 11908

Allen 1/2 model#12806, repair kit#12809
Craftsman 1/2 model#44977.44983,44944,44973,44978, repair kit#43446
Easco 1/2 model#731112,731111, 731116, repair kit#12809
K-D 1/2 model#731111,731116, repair kit#12809
Master Mechanic1/2 model#T1661
Napa 1/2 model#NHT NS-47, repair kit#12809


http://www.wrighttool.com/pub/default.asp?catalog=0  Wright Tool



http://www.matcotools.com/Catalog/toolcatalog.jsp?cattype=T  Matco

http://digimag.rrd.com/CAT1000i/  Snap on Industrial

http://www.mactools.com/    MAC Tools

http://www.craftsman.com/garageofknowledge/  Craftsman

http://www.wildetool.com/  Wilde Tool

http://www.armstrongtools.com/   Armstrong Tool

http://www.elora.de/  For their fine line of German hand tools.

http://www.jhwilliamstoolgroup.com/cat-21-1-203/Ratchets-and-Handles.htm#lightbox2  JH Williams, Bahco, Milford, CDI Torque

http://www.mayhew.com/   Mayhew Tools

http://www.cornwelltools.com/   Cornwell Tools

http://www.skhandtool.com/

http://www.grip-on.com/                                                      Grip-on Tools
http://www.knipex.com/                                                       Knipex
http://www.stridetool.com/                                                   Stride Tools
http://www.aeincorporated.com/kastar/                                  Kastar Tools
http://www.stahlwille.com/                                                   Stahlwille Tools
http://www.hazet.de/en.html                                                Hazet Tools
http://www.wihatools.com/                                                   Wiha Tools
http://www-us.wera.de/home_us.html?&no_cache=1&L=1          Wera Tools
http://www.ridgid.com/                                                        Ridgid Tools
http://www.wiltontool.com/                                                  Wilton
http://www.viseparts.com/           IMPORTANT LINK TO SOME OBSOLITE PARTS FOR VISES!
http://www.usag-tools.com/  USAG Tool Company, Italy
http://www.beta-tools.com/beta/index_en.html  Beta Tool Company, Italy
http://www.facom-tools.co.uk/  Facom Tool Company, France


www.hydraulicjackrebuild.com     Hydraulic Rebuid kits/help/advice/etc....* This site is run by HiBall, a Hydraulic jack GURU for those that do not know him. Great guy, has strong endorsement. Give him a try

http://www.harryepstein.com/ *Personally endorsed by Uncle Buck, Harrys is a great place to shop with helpful knowledgable staff and a good selection of tools at great prices. If you can visit, do. If you cannot, then just order from them, they will treat you right! Located in downtown KC. Missouri



ADDITIONAL INFO HERE: http://www.hti.org/HTIdirectory.asp


Here is a link for alex71, one of our members. Alex has web site, and sells a lot of cool stuff that most of us have a need for now and again. Every once in a while alex has tools too! This member is well spoken of by everyone I have heard from here, so that is the best I can tell you. Here is his link.   http://asmc.net/index.html
« Last Edit: August 31, 2011, 09:01:15 PM by rusty »
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 12893
  • location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Tool Resource Guide
« Reply #1 on: August 18, 2010, 09:43:48 AM »
Here is another link for you to find manuals for older equipment you might have. If you find this same link elsewhere on the forum, please forgive me.

http://www.hammerwall.com/
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Centerpunch

  • Knows what a screwdriver is
  • ********
  • Join Date: Apr 2013
  • Posts: 6195
  • location: USA
Re: Tool Resource Guide
« Reply #2 on: April 20, 2013, 03:28:48 PM »
Just noticed that the Gray Tools link no longer is valid and produces the  following message when you click on that link.  The message reads Not Found The requested URL /Default2.htm was not found on this server.

With the Lisle Tools link, this link is also no longer valid either.  Using the link provided I received the 500 Internal Server Error as well as this message.  An Error Has Occurred.  Unfortunately we encountered a problem while trying to process your request. This may be the result of a server problem, an error with the page, or bad data. Please be assured that site administrators have been notified of this issue.

But I found out that Witte sells a large amount of drive sizes, including the very challenging to find Torx Plus Tamper resistant.   Camcar more or less has placed a lock down on where you buy that drive size, but here you go.  Since Witte is a part of Knipex, this item is likely made in Germany, but even if this is not made in Germany, it's not made in China knowing Knipex.

Also Hammerwall seems to be a good concept, but is not able to pull up any information on all of my tools with the model numbers I've imputed.  Maybe this works better with new items you can buy anywhere?


Offline lbgradwell

  • Hunt and peck king
  • ********
  • Join Date: Jul 2010
  • Posts: 3515
  • location: Milton, ON
Re: Tool Resource Guide
« Reply #3 on: April 20, 2013, 05:17:02 PM »
Since Witte is a part of Knipex...

No.

The Garage Gazette

Re: Tool Resource Guide
« Reply #3 on: April 20, 2013, 05:17:02 PM »

Tags: