Author Topic: Saw stand  (Read 172 times)

Offline brslk

  • Can use hammer
  • *********
  • Join Date: Apr 2011
  • Posts: 9564
  • location: Edmonton, Alberta, Canada.
  • Lackey and general stooge.
Saw stand
« on: July 07, 2017, 09:21:46 PM »
Some of you know I'm building a shed and just bought a miter saw. I figured I'd need an outfeed stand for longer boards.
I'm sure they aren't very expensive but I figured I'd make one with the scrap I had.
I used some pipe that I welded washers on the ends for a roller and angle iron for the rest.
Welded a nut to a larger OD pipe for height adjustment and used the old stand from my halogen lights.
Works perfect and can be adjusted for my highest and lowest saw.
And free!

I'm just a guy in a garage with some tools...

Bruce.

Online slip knot

  • Hunt and peck king
  • ********
  • Join Date: Apr 2012
  • Posts: 4539
  • location: Texas gulf coast
Re: Saw stand
« Reply #1 on: July 08, 2017, 12:23:53 AM »
 thumbsup2 pretty fancy roller stand. even used the fancy metric level on it too. thumbsup2 
Started with nothing and still have most of it left.

When did the American Dream become an entitlement program?

Offline brslk

  • Can use hammer
  • *********
  • Join Date: Apr 2011
  • Posts: 9564
  • location: Edmonton, Alberta, Canada.
  • Lackey and general stooge.
Re: Saw stand
« Reply #2 on: July 08, 2017, 12:45:23 AM »
Metric levels are the best. Those SAE ones don't work here in Canada. The bubble goes all weird.
Like how toilets flush backwards in Australia!
I'm just a guy in a garage with some tools...

Bruce.

The Garage Gazette

Re: Saw stand
« Reply #2 on: July 08, 2017, 12:45:23 AM »

Tags: