Author Topic: Craftsman vise  (Read 435 times)

Offline BossH0G

  • Newbie
  • *
  • Join Date: Jul 2017
  • Posts: 23
  • Location: Hixton Wisconsin
Craftsman vise
« on: August 13, 2017, 07:21:11 PM »
Thanks slip knot, it looks like it will, I got it cooking now it's going slow, small charger set on 55 amps coffeex

Online slip knot

  • Hunt and peck king
  • ********
  • Join Date: Apr 2012
  • Posts: 4808
  • Location: Texas gulf coast
Re: Craftsman vise
« Reply #1 on: August 13, 2017, 09:57:09 PM »
run it at 10 and it will work fine. the important part is to keep the connections good and to clean the anodes regularly. you'll know when it needs attention when it quits bubbling
Started with nothing and still have most of it left.

When did the American Dream become an entitlement program?

Offline goodfellow

  • RestroLibrarian
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13203
  • Location: Northern Virginia
Re: Craftsman vise
« Reply #2 on: August 13, 2017, 11:08:13 PM »
55A is probably too high a charge -- go low and slow 5-10A is sufficient. Amperage is correlated with surface area --

Offline BossH0G

  • Newbie
  • *
  • Join Date: Jul 2017
  • Posts: 23
  • Location: Hixton Wisconsin
Re: Craftsman vise
« Reply #3 on: August 31, 2017, 10:45:38 PM »
Hi all, well there was a few comments about this being another electrolysis thread there's more on electrolysis somewhere else's so I thought i would skip the rest of the electrolysis process of Making it Purdy. With that being said I have had great success with the electrolysis and got it freed up and mostly disassembled except for the swivel base lock nut.   8)  once I have the lock nut removed I will move on to the cabinet blaster for some good ol bead blasting.

The Garage Gazette

Re: Craftsman vise
« Reply #3 on: August 31, 2017, 10:45:38 PM »