Author Topic: More millwright work with some specialty tooling.  (Read 24748 times)

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #600 on: April 15, 2018, 03:19:44 PM »
..

Sent from my SM-G955U1 using Tapatalk


Offline highland512

  • Hero Member
  • *****
  • Join Date: Jun 2010
  • Posts: 861
  • Location: Somewhere near a corn field
  • Member of NOMAAM
Re: More millwright work with some specialty tooling.
« Reply #601 on: April 15, 2018, 05:33:57 PM »
That’s going to take lot of anti seize!
-Matt
"I believe that the best possible social program is a job." -Ronald Regan

Offline DeadNutz

  • Super Hero
  • ******
  • Join Date: May 2015
  • Posts: 1881
  • Location: Minden, NV
Re: More millwright work with some specialty tooling.
« Reply #602 on: April 15, 2018, 07:14:03 PM »
Does Fastenal stock those?

Offline tool hunter

  • Hero Member
  • *****
  • Join Date: Dec 2010
  • Posts: 866
  • Location: lehigh valley, pa
Re: More millwright work with some specialty tooling.
« Reply #603 on: April 15, 2018, 10:53:25 PM »
How big is the allen wrench that fits that?

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #604 on: April 16, 2018, 07:22:03 AM »
Does Fastenal stock those?
That’s going to take lot of anti seize!
Maybe a gallon

Sent from my SM-G955U1 using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #605 on: April 16, 2018, 07:22:13 AM »
How big is the allen wrench that fits that?
4"

Sent from my SM-G955U1 using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #606 on: April 16, 2018, 07:22:33 AM »
Does Fastenal stock those?
Actually they do

Sent from my SM-G955U1 using Tapatalk


Offline fatfillup

  • numbnuts
  • Spins ratchet
  • *
  • Join Date: Jun 2010
  • Posts: 19189
  • Location: Maryland
Re: More millwright work with some specialty tooling.
« Reply #607 on: April 16, 2018, 10:13:22 AM »
4" allen,,,,,,,,,,,wow

I had a 2" allen wrench.  Was 2 feet long.  Sold to a guy as a wall hanger.  Have not seen anything bigger or even close since.
That scalloped box end is one of the few BB features that doesn't make Elroy puke

Offline eborcim

  • Hunt and peck king
  • ********
  • Join Date: Jun 2010
  • Posts: 3961
  • Location: Missouri
  • 143
Re: More millwright work with some specialty tooling.
« Reply #608 on: April 17, 2018, 12:17:23 AM »
How big is the allen wrench that fits that?
4"

Sent from my SM-G955U1 using Tapatalk

What is the torque spec on that? 

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #609 on: April 17, 2018, 04:11:53 AM »
How big is the allen wrench that fits that?
4"

Sent from my SM-G955U1 using Tapatalk

What is the torque spec on that?
16k ftlbs

Sent from my SM-G955U1 using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #610 on: April 17, 2018, 04:13:21 AM »
4" allen,,,,,,,,,,,wow

I had a 2" allen wrench.  Was 2 feet long.  Sold to a guy as a wall hanger.  Have not seen anything bigger or even close since.
I have seen bigger wrenches than that but when they get close to what this bolt is you just use a bit in the hydraulic torque wrench

Sent from my SM-G955U1 using Tapatalk


Online gtermini

  • Hero Member
  • *****
  • Join Date: Oct 2014
  • Posts: 803
  • Location: Amity, OR
    • Imgur Picture Dump
Re: More millwright work with some specialty tooling.
« Reply #611 on: April 17, 2018, 07:28:47 PM »
Almost BM sized stuff here. 3" ID spherical thrust bearing for 150 ton load at the structural concrete testing lab. Pretty cool bearing with a giant range of motion. I had to make two 8" X 2" thick mount plates. Timken spec'd bore 4.3738 ±.0007. Made the old Monarch earn its keep.







Greyson

Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #612 on: April 17, 2018, 07:30:14 PM »
Almost BM sized stuff here. 3" ID spherical thrust bearing for 150 ton load at the structural concrete testing lab. Pretty cool bearing with a giant range of motion. I had to make two 8" X 2" thick mount plates. Timken spec'd bore 4.3738 ±.0007. Made the old Monarch earn its keep.







Greyson
For skateboard wheels?

Sent from my SM-G955U1 using Tapatalk


Offline BoredMechanic

  • Super Hero
  • ******
  • Join Date: Oct 2014
  • Posts: 2675
Re: More millwright work with some specialty tooling.
« Reply #613 on: April 20, 2018, 06:19:44 PM »
..

Sent from my SM-G955U1 using Tapatalk


Offline fatfillup

  • numbnuts
  • Spins ratchet
  • *
  • Join Date: Jun 2010
  • Posts: 19189
  • Location: Maryland
Re: More millwright work with some specialty tooling.
« Reply #614 on: April 21, 2018, 01:54:28 PM »
^^^^^What??  No food, no tools and I don't see anything broke panicx
That scalloped box end is one of the few BB features that doesn't make Elroy puke

The Garage Gazette

Re: More millwright work with some specialty tooling.
« Reply #614 on: April 21, 2018, 01:54:28 PM »