Author Topic: Machinist's Resources & References  (Read 4962 times)

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Machinist's Resources & References
« on: June 18, 2010, 12:02:30 AM »
Books and articles below:

http://books.google.com/books?id=k0JVAAAAMAAJ&pg=PR7#PPP2,M1




More web sites that are machinist related below, links contributed by members:

http://www.shopfloortalk.com/forums/index.php
http://www.frets.com/HomeShopTech/hstpages.html
http://www.practicalmachinist.com/vb/index.php
http://bbs.homeshopmachinist.net/
http://www.cnczone.com/forums/index.php?
http://mdmetric.com/tech/cvtchtfdm.htm
http://techtv.mit.edu/videos?page=1&q=machine+shop
http://www.lathes.co.uk/
http://www.ktmarketing.com/CNC.html
http://www.csgnetwork.com/pulleybeltcalc.html  A belt/pulley rpm calculator.
http://www.lindsaybks.com/index.html  Tons of great info, a lot about machine shop stuff, plus much more!




I will add recommended new or used machinery dealers that members would like me to post.   (I will only add vendors from well established members) So if you are brand spankin new here, just wait till you have a hundred or so posts behind you before suggesting an add.



Here is another link to a site with some good project plans and other such stuff!
http://www.lautard.com/   ADDED 6/19/2010
« Last Edit: March 14, 2018, 09:10:28 PM by Uncle Buck »
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #1 on: June 24, 2010, 03:30:19 PM »
Another site I found for resources for the home shop crowd here. http://www.flywheelmachinetools.com/AandP.html

I have had no business dealings with them, so this is not an endorsement, simply another resource I found.

HERE IS AN OLD 1982 ARMY MANUAL GIVING INSTRUCTIONS ON THE PROPER OPERATION OF A METAL SHAPER. vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

http://www.eurospares.com/graphics/Tools/shapers/sbarmy7shaper.pdf
« Last Edit: November 15, 2010, 11:46:17 AM by Uncle Buck »
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #2 on: November 09, 2011, 05:50:32 PM »
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #3 on: November 14, 2011, 10:38:02 PM »
Another good looking resource here. http://www.bluechipmachineshop.com/
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #4 on: March 24, 2013, 10:36:08 AM »
This site is big on knurling information! http://accu-trak.com/technicalinfo.html
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #5 on: March 26, 2013, 03:56:23 PM »
Need a bandsaw manual? Check here...........     http://bandsawmanuals.com/
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

Offline Uncle Buck

  • Site Owner/ Founding Spammer
  • Administrator
  • Knows nut from bolt
  • *****
  • Join Date: Jun 2010
  • Posts: 13400
  • Location: Kansas-Flyover Country!
  • The name of my small shop is the Skunkworks!
Re: Machinist's Resources & References
« Reply #6 on: April 05, 2013, 03:17:35 PM »
« Last Edit: March 14, 2018, 09:12:24 PM by Uncle Buck »
You boys better hold on cause i'm gonna have to stand on it!

NEED A 1/2" BONNEY STREAMLINE COMBINATION AND ANY OVER 13/16" TOO!



Andrew Jackson quote: But you must remember, my fellow-citizens, that eternal vigilance by the people is the price of liberty, and that you must pay the price if you wish to secure the blessing.

The Garage Gazette

Re: Machinist's Resources & References
« Reply #6 on: April 05, 2013, 03:17:35 PM »