Author Topic: MAC wrenches  (Read 225 times)

Offline Snaparxon

  • Hero Member
  • *****
  • Join Date: Jul 2010
  • Posts: 715
  • location: In the shop
MAC wrenches
« on: July 19, 2017, 09:03:40 AM »
Looking for the missing wrenches  to complete these sets. Prefer satin finish wrenches but chrome is ok also.
Looking for standard and metric CW series combo wrenches with the two lines on the back side of the beam as pictured on the CW28. Also need a CH8 1/4" and CH10 5/16" 6 point combination wrench. These were not available in 12 point according to a 1971 catalog

Cash or trade
« Last Edit: July 19, 2017, 09:41:10 PM by Snaparxon »

Offline Snaparxon

  • Hero Member
  • *****
  • Join Date: Jul 2010
  • Posts: 715
  • location: In the shop
Re: MAC wrenches
« Reply #1 on: July 19, 2017, 09:05:24 AM »
CA and CWS series wrenches I am looking for to fill in the missing wrenches of my set
« Last Edit: July 19, 2017, 09:36:57 PM by Snaparxon »

Offline Snaparxon

  • Hero Member
  • *****
  • Join Date: Jul 2010
  • Posts: 715
  • location: In the shop
Re: MAC wrenches
« Reply #2 on: July 19, 2017, 09:07:55 AM »
Looking for the missing wrenches in my incomplete set of COB series flare nut wrenches

Found the missing M1214DR open end wrench so the DOE set is now complete. 
« Last Edit: July 19, 2017, 09:40:30 PM by Snaparxon »

Offline OldnSlo

  • Super Hero
  • ******
  • Join Date: Jan 2012
  • Posts: 2405
  • location: Arid-zona
Re: MAC wrenches
« Reply #3 on: July 19, 2017, 07:55:58 PM »
Just for clarification, you are looking for MISSING sizes from the pics posted.

Si?

Offline Snaparxon

  • Hero Member
  • *****
  • Join Date: Jul 2010
  • Posts: 715
  • location: In the shop
Re: MAC wrenches
« Reply #4 on: July 19, 2017, 08:36:25 PM »
Just for clarification, you are looking for MISSING sizes from the pics posted.

Si?

Yes.  and  wrenches like the first two pics. CW series with 2 lines on the back. I need some CW series in standard and metric.  I need a 1/4" CH8 6 point  and 5/16" CH10 6 point as they were not available  in 12 point also

The Garage Gazette

Re: MAC wrenches
« Reply #4 on: July 19, 2017, 08:36:25 PM »

Tags: